ATV Tech articles related to Billet and Bling
 | April 1, 2007
By:Mike Lyon
The Yamaha Rhino has proven to be a huge hit to off-road enthusiasts. Straight off the show room floor they are reliable and loads of fun. However, some of the OEM parts will break over time especially the cheap plastic seat latches. If your seat latch has broken or when they do break there is a better alternative, the Black Rhino Performance billet seat latch.
 |
 | March 1, 2005
By:Dean Waters
Yea it has been awhile since we have updated this project. It has been a little cold around hear. Yea, lousy excuse.... So let's get on with it.
|
 | March 1, 2003
By:Dean Waters
After years of building billet parts for their own bikes and quads, the crew at Extreme Engineering has decided to release their own line of custom machined billet accessories.
|
 | January 1, 2003
By:Dean Waters
It may seem like a little thing, but sometimes good things do come in small packages. And NOT from the jewelry store.
|
 | November 1, 2002
By:Dean Waters
While these GYT-R Billet hubs may not make your Raptor any faster, they sure will make it stand out in a crowd. The GYT-R hubs come complete with bearing and seals already installed. I didn't break out the micro scale to weigh them but there was no noticeable difference in weight between the stock hub and the new GYT-R hubs.
|
 | May 1, 2002
By:Dean Waters
We made a HUGE mistake by not adding these GYT-R accessories sooner - if you read last month's Project update, you understand why. Not having the belly skidplate cost us dearly, with a hole in the crankcase and about 6 weeks of downtime getting it repaired. Follow along as we bolt up some protection for Project Raptor, so we don't unnecessarily lose riding time again!
|
 | December 1, 2001
By:Dean Waters
You can't have a trick ATV without some custom Billet Aluminum pieces. ProTech ATV sent us some pieces for our project 400EX and some additional samples of other billet pieces they manufacture. ProTech can provide brake block-off covers, brake reservoir covers, case savers, handl bar clamps, reed spacers, thumb throttle covers, water pump covers, and A-arm bushings. All pieces are CNC-machined billett aluminum 6061-T6.
|
 | September 1, 2000
By:Patrick J Chicas
Resurrection
Basket Inventory
Counting The
Body Parts
# Part #1
# Part #2
Rolling Chassis
A Skeleton
With Legs
Powerplant
The Fire in
# The Monster Part #1
# Part #2
Assembly
All The
Little Stuff!
Options
Final Mods
and Assembly
Contributors
Project Sponsors
ATV On-line
Glamis On-Line
Glamis Mail list
The ATV BBS
Mr. Dune's Sandbox
Final Mods & Assembly
Chapter #1
by: Pat Chicas
edited by:Mr. Dune
Well kids it's been almost a year since we started working on this project. And at long last we are ready for those little finishing touches that will make our 'Zilla stand out amongst the crowd...
|
Untitled Document Off-Road Videos -
Check out over ten years of extreme 4x4 action, product testing and the Off Road Nation at play. Baja racing to rock crawling, ATVs in the sand to motorcycles in the dirt, it's all here. Rate them, share them and upload your own.
|
 ATV Reviews -
Honda, Suzuki, Yamaha, Polaris, Kawasaki, Can-Am. First rides to long-term tests, check out the latest in ATVs, UTVs and Side-by-Side vehicles of every make and model. Read expert opinions and follow custom project vehicles. |
 Axxxtion Sports.....
Axxxtion Sports is heating things up with their 2010 Winter Heat snowmobile calendar! Simply Sexy! |
| 
