Z400 Frame Gusset Kit by Bare Performance - Project QuadSport Z400 ATV - - ATV at Off-Road.com
ATV & UTV »

Price and Compare Vehicles:
New, Used, and Powersports    Go button

Z400 Frame Gusset Kit by Bare Performance - Project QuadSport Z400 ATV
Publish date: Mar 1, 2004
By:  Dean Waters
Source: ATV at Off-Road.com
The Z400 frame has excellent geometry for the ATV racer but notoriously has a serious problem with strength. The typical recreational rider will probably never see this problem, however if you race your LTZ or subject it to severe use such as jumping, you will quickly find there are a number of weak points in the frame. Inspecting Project Z400 after the BITD Parker 250, we could see that the frame was starting to stress-crack near the upper shock mounts on the front suspension. We started looking into getting our frame gusseted and found a number of places that were doing this, but it would require us shipping the frame to them and being without it for as long as eight weeks. We were not excited about the extended down-time. Then we discovered a company selling a gusset kit at a VERY reasonable price. Bare Performance in Muncie, Indiana, is offering a 13-piece gusset kit for $68.95. This kit covers all the major weak points in Z400 frame. We had access to a local shop that could sandblast, weld, and powdercoat, so we ordered the gusset kit from Bare Performance. (If you don't have a local shop, Bare performance can also weld and powder coat your frame for $449.95.) What you will get is a bunch of small pieces of metal and a diagram like the one here, showing where all the pieces should go. Installation We stripped down our Z400 to the frame. This took us about four hours, including time to carefully ziplock and label all the bolts and parts so we would know where they went when reassembly time came. Next we took the bare frame, the gusset kit, and our sub-frame to Kni-Co brand new manufacturing facility in Wallowa, Oregon. Their specialty is custom metal sheepherder's stoves, but they also manufacture a number of other pieces and have their own in-house powdercoating equipment.
This is the gusset on the front upper shock mount.
The shows the gussets applied to both upper shock mounts.
Kni-Co first sandblasted the frame then inspected it for cracks. As we suspected, the frame was nearly cracked through behind the upper right shock mount, but no other major cracks were found. Kni-Co carefully tig-welded and repaired that crack. With the repair made they welded in all of the gusset pieces per the diagram. Most of the gussets fit nicely, but a few had to have modifications before they could be welded in place, as they did not quite fit.
This is the gusset near the front A-arm.
Gussets are applied to the steering stem and gas tank mount. Make sure your tank clears these. We actually had to modify the one on the right to clear our Clarke tank.

Gussets behind the A-arm mounting location.
Gussets near the motor mounts.

With the frame upside-down you can see the gussets applied to the bottom.
Kni-Co did a great job welding the Z400 frame, making sure to apply the right amount heat so that the frame was not damaged. After all the gussets were welded in place Kni-Co then re-sandblasted everything so that it was ready to be powder coated. Sandblasting is the most time-consuming and labor-intensive part of the whole process. Kni-Co can powder coat many different colors or can attempt to match a color. We chose to use the same color as our Holz front A-arms which are Cardinal BL01. We plan to also have our rear swing arm done in this same color. Summary We received our frame and sub-frame nicely shrink wrapped. Kni-Co did an excellent job. If you don't have a local shop, we recommend you call Rob Burns for a quote on your job. The complete job cost us about $300, including the gusset kit from Bare Performance. Down time was about two weeks but could have been less. Bare Performance provides an excellent gusset kit for only the money. A couple days reassembling and Project Z400 will be ready for a local hare scrambles event and a complete season of racing.
Shrink-wrapped frame and sub-frame
Project Z400 partially assembled
Suggestions, comments, products you would like to see tested and installed on Project Quadsport Z400? Please let us know via Email.

   Contact Information

Kni-Co Manufacturing
Phone: (541) 886-8055
Fax: (541) 886-6305
www.kni-co.com

Bare Performance
Phone:(765) 744-0320
Muncie, Indiana
sales@bareperformance.com
www.bareperformance.com

Project Z400 Sponsors

Send us Email about Project Z400

About the Author
post a comment
Please complete the form below to post your comment.
Bold = Required
Email Address Your email address will NOT be published.
Display Name appears with your comment
City
State
Country
Remember me: YesNo
Comment read our privacy policy
Note: does not support HTML
All comments submitted are subject to review, and may be delayed before posting. We reserve the right not to post comments.
Untitled Document
Sponsored Links
HOLY CRAP Or Your Money Back -
Once you try it - we dare you to drive without it. To learn more click here.
Off-Road Videos -
Check out over ten years of extreme 4x4 action, product testing and the Off Road Nation at play. Baja racing to rock crawling, ATVs in the sand to motorcycles in the dirt, it's all here. Rate them, share them and upload your own.
ATV Reviews -
Honda, Suzuki, Yamaha, Polaris, Kawasaki, Can-Am. First rides to long-term tests, check out the latest in ATVs, UTVs and Side-by-Side vehicles of every make and model. Read expert opinions and follow custom project vehicles.
Own your very own Off Road Superstore.....
How many times have you pondered the idea of owning your very own off road shop? Let the staff at Off Road Innovations, one of the largest aftermarket off road accessory dealers in the US, help turn your hobby into a profitable career. Go to www.offroadinc.net for more info or just call 800-809-6088.
MSD Ignition Rebate!
Fire up with MSD Ignition and receive Cash for Cruising! Click on the link to find out the latest cash back rebate from MSD.

Enewsletters

Stay on Top of All the Action:
Sign up for Off-Road.com's Enewsletters

Source: ATV at Off-Road.com, 3/1/2004
Click here