Page 2 Motion Pro Twist Throttle Project Raptor - - ATV at Off-Road.com
ATV & UTV »
Page 2 Motion Pro Twist Throttle Project Raptor

Source: ATV at Off-Road.com
Most garage mechanics should have no problem with this modification
*Although the Motion Pro directions recommend you have a professional install the kit.

 The factory thumb throttle housing was broken.

 Two screws and the housing was loose from the handle bars.

 
On the left side of the Raptor, remove three screws to get access to carb end of the cable.
With the cover off, slide the cable end out. Make sure not to lose the small brass end - you will need to reuse it!
 
The new Motion Pro cable is about two inches longer than the stock cable. Pay close attention to how the stock cable is routed - you will want to route the new cable the same way.
A sheetrock knife makes quick work of removing the old grips.
You need to sand the handle bar end smooth. You may even want to hit it with a light sanding disc. You do NOT want your throttle to stick.
A light coat of grease should be applied to the bar before installing the throttle tube. The tube needs to spin ultra smooth on the handle bar.
 
Next install the aluminum throttle housing and attach the cable to the throttle tube.
With the throttle working smoothly, install the new grips. A little soapy water helps the grip slide on.
Get ready to ride!

We did the smart thing *NOT* and installed the twist throttle the night before a race. Not just any race either, this turned out to be a very tough 13 mile desert course. I recall saying to myself numerous times on the first lap "This was not a good idea.". Sure, we have been riding other quads with a twist throttle quite frequently, but not this one. I would suggest that you plan some easy trail rides to get use to your Raptor with a twist throttle before taking on a race.


I found that I needed to put more free play in the throttle than I started out with initially. The free play allows you a little movement of your wrist/hand without adding throttle when you do not want it.


SummaryThe Motion Pro Kit was complete and works well. Rocky Mountain ATV delivered it in record time, as usual, with great service to boot. Have fun and make sure to take some time to get used to your new twist throttle!



>>> Page 1 - Motion Pro ATV Twist Throttle

  • Contact Information & Related links

 
Motion Pro, Inc.
119 Independence Drive
Menlo Park, CA 94025

For more info or a dealer near you!

Email SportQuad.com Staff!

     
 
 

Please submit any technical questions to the bulletin board.
Advertisement
Follow us on Twitter at www.twitter.com/OffRoadDotCom
post a comment
Your email address will NOT be published.
appears with your comment
read our privacy policy
Note: does not support HTML
All comments submitted are subject to review, and may be delayed before posting. We reserve the right not to post comments.
Untitled Document
Sponsored Links
Off-Road Videos -
Check out over ten years of extreme 4x4 action, product testing and the Off Road Nation at play. Baja racing to rock crawling, ATVs in the sand to motorcycles in the dirt, it's all here. Rate them, share them and upload your own.
ATV Reviews -
Honda, Suzuki, Yamaha, Polaris, Kawasaki, Can-Am. First rides to long-term tests, check out the latest in ATVs, UTVs and Side-by-Side vehicles of every make and model. Read expert opinions and follow custom project vehicles.
Axxxtion Sports.....
Axxxtion Sports is heating things up with their 2010 Winter Heat snowmobile calendar! Simply Sexy!

Enewsletters

Stay on Top of All the Action:
Sign up for Off-Road.com's Enewsletters

Source: ATV at Off-Road.com,
Click here